RPCS, Knobelsdorff Partner for 17 MW Portfolio

Posted on September 8, 2020November 17, 2023 by Bri Bruce

(Monterey, CALIF.) September 8, 2020—RP Construction Services, Inc. and Knobelsdorff announced earlier this week their 2020 partnership to include supplying 14 communities throughout the state of Minnesota with clean, renewable solar energy.

RPCS, a trusted partner of leading solar tracker manufacturer Array Technologies, Inc., will be supplying the DuraTrack HZ v3 single-axis solar tracker for the portfolio of projects. Array trackers keep the solar PV modules following the sun on its course throughout the day, optimizing energy gains and ensuring up to a 20 to 25 percent increase in energy production over fixed-tilt systems.

Knoblesdorff Energy (KE), a division of Knobelsdorff, will partner with RPCS to perform engineering, procurement, and construction (EPC) services. KE also performs startup, commissioning, and O&M services for the renewable energy market, ranking as the #1 top solar contractor in Minnesota and #24 in the nation.

RPCS and KE have worked closely over the last several years on several projects and completed nearly 20 megawatts’ worth of solar projects in 2019.

Included in the 2020 pipeline, the 1.2 MWdc Silver Lake project will be the very first solar array utilizing a combination of AP Alternatives’ ground screw foundation and the Array Technologies single axis tracker. KE will be completing the civil and electrical scope as well as the mechanical installation as the project EPC.

“Partnering with RPCS to be a part of the first solar project using AP Alternatives and Array Technologies is exciting,” said Jeff Schrimpf, General Manager, Energy of KE. “The system has allowed us to find a cost-effective alternative to standard H-pile due to poor soil conditions. Without this alternative, the project may not have been feasible to build.”

“Knobelsdorff is always wonderful to work with,” says RPCS Sales Director Patty Thornton. “They’re timely, efficient, and trustworthy. We’re excited about the upcoming pipeline, but more importantly we’re pleased to have been selected as their source for Array trackers for their projects in Minnesota.”

The portfolio of Minnesota projects will total 17 MWdc, and will be completed in 2020.

RP Construction Services, Inc. (RPCS) designs, supplies, and builds utility-scale ground mount solar projects. With more than 500 completed projects throughout the United States, RPCS provides full turnkey service and support, including site layout optimization, ancillary engineering services, tracker supply, foundation post procurement, and complete mechanical installation. As a trusted partner of leading solar tracker manufacturer Array Technologies, RPCS’s history, experience, and product knowledge provides customers with a trusted choice for seamless portfolio execution. Visit stgrpcs.wpengine.com for more information.

Knobelsdorff is a premier Electrical, Engineering, Automation and Renewable Energy team offering endless opportunities and innovative solutions to customers across North America. Ranked #126 in Inc. 5000 Series List “fastest-growing companies in the Midwest”, Knobelsdorff has grown from 5 to 150 employees in just one decade. With 30 plus years of industry knowledge, Knobelsdorff is a leader in the dairy, food & beverage, grain, feed, flour & fertilizer, industrial & manufacturing, mining, oil & gas and renewable energy markets. Visit KEway.com for more information.

RP Construction Services, Inc. Surpasses 1GW Milestone

Posted on December 10, 2019November 20, 2023 by Bri Bruce

California-based solar project design and installation firm RP Construction Services, Inc. (RPCS) is proud to announce their completion of more than 1GW of solar projects.

For RPCS, 2019 was a record year. The company completed well over half a gigawatt in 2019 alone—an increase of more than 200% over 2018—and more than 200 projects in 19 different states.

“We’re thrilled to reach this gigawatt milestone—almost 400 projects of hard work and great memories, with many more to come,” says RPCS Chief Sales Officer Alex Smith.

Installing both individual projects and national portfolios, RPCS continues to establish itself as a relationship-based company focused on long-term partnerships—with customers, partners, and employees alike.

“The numbers are fun to celebrate, but the meaningful part is that our company has grown to well over 150 individuals, all dedicating their careers to our single focus of being the best team in the solar industry. In the next five years, we’ll see our numbers grow even more because our focus won’t ever change,” says Smith.

Headquartered in Monterey, California, RPCS provides leading turnkey design, engineering, and installation services for ground mount solar projects throughout the United States. The team specializes in site layout optimization, ancillary engineering services, tracker and foundation procurement, and complete mechanical installation. RPCS’s experience in the ground mount utility and distributed generation market ensures reliable support at every step of the project, delivering an unmatched level of quality and efficiency.

Despite market holdup due to the uncertainty surrounding tariffs and the stepdown of the solar investment tax credit, RPCS successfully grew its pipeline for 2019, 2020, and 2021. Early this year, RPCS began offering customers a stocking services option with the opening of two locations in California and Texas, an endeavor that has already proved advantageous since its initiation in January. Bringing stocking operations in-house gives RPCS added levels of predictability, efficiency, and reliability to their business operations. RPCS is able to control the delivery schedule and material accuracy, eliminating schedule impacts as well as overall inefficiencies.

Concurrently, RPCS implemented their Safe Harbor strategy to help project developers, financers, and owners to take advantage of the highest possible ITC rate for projects built in the coming years. Their strategy allows customers to realize savings by both purchasing solar tracker materials directly from RPCS as well as storing them safely and cost effectively in RPCS’s storage facilities to serve projects nationwide.

Among other notable achievements this year was the company’s recognition as a Top Solar Contractor for the second year in a row by Solar Power World Magazine, the industry’s leading resource for news and information regarding solar PV installation, development, and technology. RPCS achieved a rank of No. 15 overall out of 415 solar companies, moving up on the list from No. 18 the previous year. RPCS holds the reigning position in the state of Georgia at No. 1, in addition to being ranked the No. 15 Utility Contractor, the No. 4 Installation Subcontractor, and the No. 11 Contractor in their home state of California.

“Its’ an exciting time. The industry is thriving,” says RPCS CEO Eben Russell. “We feel a forever shift has happened, that a world that runs on renewable energy is now a matter of when, not if. Our team, at every level, continues to have enthusiasm to evolve, innovate, and refine. To our customers, vendors, and especially our employees, both past and present, thank you!”

With 2020 on the horizon, the company remains more committed than ever to advancing the growth of solar energy—for the next gigawatt and beyond.

RP Construction Services, Inc. designs and builds ground mount solar projects. With over 360 projects and more than 1GW completed or under construction throughout the United States, RPCS provides full turnkey service and support for solar tracker projects, including site layout optimization, ancillary engineering services, tracker supply, foundation post procurement, and complete mechanical installation. For more information about RPCS, please visit rpcs.com or call us at 831.620.2188.

Looking Back at Solar Power International 2019

Posted on October 3, 2019November 20, 2023 by Bri Bruce

We’re looking back at our time at this year’s Solar Power International in Salt Lake City, Utah, and all we have to say is . . . WHAT A SHOW! Here’s a brief recap of the week’s highlights.

With more than 19,000 attendees from across the renewable energy spectrum, this year’s show was RPCS’s most exciting yet. The company, nearing it’s five-year anniversary, celebrates over 360 projects and nearly 1GW of solar completed.

“We love going to these shows,” says Alex Smith, RPCS’s Chief Sales Officer. “We do so many projects rapid-fire throughout the year that we don’t often get a chance to just stop and catch up with our customers and vendor partners. This year’s SPI was fantastic, lots of smiles and talk about making next year even better than this one.”

Ahead of the show’s start, RPCS members participated in the Run with the Sun 5K on Monday, spending the morning with 1,000 of their fellow solar friends. It was an exciting start to the week, with waterfalls and inclines leading to a spectacular sunrise over Salt Lake City.

On Monday night, RPCS was among the honorary guests in attendance at the Top Solar Contractors Gala, hosted by Solar Power World, where they were presented with an award for achieving a rank of No. 15 overall on the Top Solar Contractors list. Among their other rankings, RPCS placed No. 1 in the state of Georgia, No. 15 Utility Contractor, No. 4 Installation Subcontractor, and No. 11 Contractor in their home state of California.

On Tuesday morning, RPCS joined Array Technologies in booth 1627 as their trusted partner and to once again show their support for the world’s leading and most reliable solar tracker. Visitors caught a demo of the DuraTrack HZ v3 solar tracker in action, topped with bifacial modules.

Throughout the show, there was lots of talk about RPCS’s Safe Harbor strategy with the end of the year–and the phase out of the solar investment tax credit–on the horizon. Earlier this summer, RPCS detailed their Safe Harbor strategy to allow project developers, financers, and owners to benefit from this year’s ITC rate. Their industry-leading stocking position will enable customers to build more projects and handle portfolio execution with more flexibility, all while leveraging the ITC and plan for projects in the coming years. RPCS is helping customers secure the highest tax credit rate while minimizing risks from project or technology changes. Check out our post on our Safe Harbor strategy for more information.

If you didn’t have a chance to come by the booth, reach out to our team at info@rpcs.com or join our mailing list to stay up to date on our future announcements and event schedule!

RPCS Helps Pine Gate Renewables and NARENCO Complete 57MW Solar Project in South Carolina

Posted on February 12, 2019November 20, 2023 by Bri Bruce

RP Construction Services (RPCS) is celebrating the success of Pine Gate Renewables and NARENCO on their recent project completion.

Pine Gate Renewables, a national utility-scale solar developer, owner, and operator, energized its Peony solar project in Orangeburg County, South Carolina, last week.

Peony is a 57-MW site spanning 334 acres. It can generate more than 97,400 MWh per year, equivalent to powering over 9,300 homes.

Project partner NARENCO, a leading engineering, procurement, construction, and development firm (EPC), helped install the 175,000 tracker panels on the site. The site features DuraTrack HZ v3 single-axis solar trackers by Array Technologies, mechanically installed by RPCS, Array’s trusted partner. The trackers keep the modules following the sun on its course throughout the day, ensuring up to a 20 to 25% increase in energy production over fixed-tilt systems.

“The efforts of all parties allowed us to deliver a high-quality project that will generate decades of clean power to South Carolina,” says Andy Giraldo, president of EPC at NARENCO.

“It was a real pleasure supporting NARENCO on this project,” says RPCS Chief Sales Officer Alex Smith. “Peony was a very well executed project and all the great planning, communication, and collaboration with NARENCO leading up to the build came together to ensure a smooth installation.”

RPCS’s latest milestone is completing over 550MW for over 260 solar energy projects throughout 27 different U.S. states and Canada. Voted a 2018 Top Solar Contractor, the company was recently also named Top 10 Renewable Energy Services Company by Energy CIO Insights.

“We are very proud of the outcome and thankful for the contributions from the teams at PGR and NARENCO,” says Chris Dunbar, CCO at Pine Gate Renewables. “We anticipate this project being a model for our future efforts in South Carolina.”

RP Construction Services (RPCS) designs and builds ground mount solar projects using the industry’s gold standard for quality, the Array Technologies DuraTrack® HZ v3 single-axis tracker. With over 550 MW and over 260 projects completed or under construction throughout the United States in the last few year, RPCS provides full turnkey service and support for the industry’s most bankable and reliable tracker. RPCS’s expert knowledge of Array Technologies’ trackers ensures world-class turnkey project assistance including site layout optimization, ancillary engineering services, tracker and foundation procurement, and complete mechanical installation. The team at RPCS provides reliable support at every step of the project, delivering a level of quality and efficiency that parallels Array’s market reputation. For more information about RPCS, please visit rpcs.com or call us at 831.620.2188.

Pine Gate Renewables is a developer, owner, and operator of utility-scale solar farms based in Asheville, NC with offices in Charlotte, NC and Jacksonville, FL. To learn more about Pine Gate and their mission to Get Solar Done, visit www.pgrenewables.com.

NARENCO is a leading engineering, procurement and construction (EPC) and development firm specializing in utility-scale and commercial solar installations. Headquartered in Charlotte, North Carolina, NARENCO has established a strong track record of success as it has developed and constructed over 200MW of solar projects. For more information about NARENCO, visit www.narenco.com.

2018 in Review

Posted on January 15, 2019November 20, 2023 by Bri Bruce

For RPCS, 2018 was an incredible year—and we think that’s worth celebrating.

This has been a year of incredible growth. RPCS saw the completion of 210 megawatts and 82 projects in 2018, the most in any year of RPCS’s history. In just a few years, RPCS has completed over 550 MW and 260 projects in 27 different states, including a 28MW project in California, a 28MW project in Hawaii, and 57MW site in South Carolina.

For the first time, RPCS broke into the Canadian solar market, completing a site in Ontario this past fall. With a robust solar market emerging from locations like Canada and Minnesota (RPCS completed 20 projects in Minnesota this year), it is becoming increasingly clear that the economics are in favor of trackers—even in the northernmost locales and in the most challenging conditions. We’re always eager to prove the advantages of ground mount solar trackers projects and to further solidify that trackers can be used in many more locations than people expect.

After market hold up in 2017 and early 2018 due to uncertainty surrounding tariffs, RPCS successfully grew its pipeline for 2019, 2020, and 2021 projects. RPCS had a busy year working with portfolio companies, and we’re seeing developers and EPCs lock in their projects much earlier given the high demand that everyone is expecting in the coming year. Many interesting projects are slated to start in early 2019, putting RPCS on schedule for an even more robust year ahead.

RPCS welcomed new staff members to help the company expand further into new regions, while increasing involvement in co-op marketing initiatives and garnering media attention. Three notable achievements this year was the company’s recognition as a Top Solar Contractor ranking number 18 overall, a Project of the Year nominee for a noteworthy project in California built at an old Chevron refinery, and the company’s recognition as a Top 10 Renewable Energy Services Company, awarded by Energy CIO Insights Magazine.

Nearing the close of our strongest year yet, we are confident in the strength of RPCS in the coming years given our current growth rate in an otherwise dampened market—one that is forecasted to improve significantly as a whole.

As we look forward into 2019 and beyond, we are as committed as ever to advancing the growth of solar energy.

RPCS Recognized as a 2018 Top Solar Contractor

Posted on July 24, 2018November 20, 2023 by Bri Bruce

The Solar Power World Top Solar Contractor List Includes Monterey-based Solar Firm

[Monterey, Calif.] July 24, 2018—More than 10,600 megawatts of solar power were installed last year in the United States, and local installer RP Construction Services, Inc. (RPCS) has been recognized by Solar Power World magazine for its contributions to the industry.

RPCS achieved a rank of 18 out of 450 solar companies on the magazine’s 2018 Top Solar Contractors list. RPCS is also the No. 18 Utility Solar Contractor, No. 3 Solar Installation Subcontractor, and the No. 8 California Solar Contractor.

The Top Solar Contractors list is developed by Solar Power World to recognize the work completed by solar contractors across the United States. Produced annually, the Top Solar Contractors list celebrates the achievements of U.S. solar developers, subcontractors and installers within the utility, commercial and residential markets, and ranks contractors by kilowatts installed in the previous year. The 2018 list was released on July 24.

“Solar Power World is very excited about the 2018 class of Top Solar Contractors,” said Kelly Pickerel, editor in chief of Solar Power World. “Our 2017 list showed impressive installation numbers after 2016’s huge rush to meet ITC requirements, and many companies were hesitant to show unavoidable installation dips after last year’s high. We’re happy to feature a strong group of thriving U.S. solar installers on the 2018 Top Solar Contractors list. These companies truly are at the top of their markets.”

The U.S. solar market had its biggest year ever in 2016, installing more than 15,000 MW. Although installations in 2017 dropped to 10,608 MW, the total still represents 40% growth over 2015 numbers. The year-over-year downturn can be attributed to the large influx of 2016 projects rushing to meet the anticipated expiration of a 30% federal tax credit that was eventually renewed. Last year also saw uncertainty surrounding potential Section 201 tariffs on imported solar panels, which may have led to delayed or canceled projects.

Despite initial setbacks posed by the Section 201 tariffs, RPCS installed more solar in 2017 than previous years, and is ramping up for a number of exciting projects in the latter half of 2018.

A major highlight of 2017 was the non-residential market growing 28% year-over-year, the fourth straight year of annual growth for commercial, industrial and community solar. In 2017, 30% of all new electric generating capacity brought online in the United States came from solar, second only to new natural gas capacity.

The first quarter of 2018 showed a 13% growth over the first quarter of 2017, and RPCS will continue to contribute to the wave of increasing solar generation. By 2023, more than 15,000 MW of solar is expected to be installed annually.

RPCS employs 66 workers, in addition to local temp labor, who installed 165,777 kW of solar power in 13 states in 2017. Since its founding in September of 2014, the company has installed over 450,000 kW of solar.

RPCS is the distributed generation and utility markets’ provider for Array Technologies DuraTrack® HZ v3 single axis tracker projects. As Array’s trusted partner, RPCS provides complete turnkey project design and mechanical installation services, and installed systems harness energy gains up to 25% higher than fixed tilt systems. RPCS’ deep history and product expertise of the DuraTrack HZ system provides customers with a trusted choice for flawless execution and repeatable success of single axis tracker projects.

“We’re thrilled and honored to have such a high ranking,” says RPCS Chief Sales Officer Alex Smith. “Sincerest thanks to our customers for their continued support. Our place among this list speaks to the relationships we have with our customers and partners, and to our incredibly hard working team.”

RPCS is working with some of the most respected names in the solar industry, and takes pride in establishing lasting relationships with partners. The team has demonstrated the ability to build numerous different projects simultaneously in multiple states and locations, further establishing their commitment to advancing the growth and future of renewable energy.

About Solar Power World

Solar Power World is the leading online and print resource for news and information regarding solar installation, development and technology. Since 2011, SPW has helped U.S. solar contractors—including installers, developers and EPCs in all markets—grow their businesses and do their jobs better.

Media Contacts

RPCS
Bri Bruce, Director of Marketing
831-620-2188
bbruce(at)rpcs.com

Solar Power World
Kelly Pickerel, Editor in Chief
216-860-5259
kpickerel(at)wtwhmedia.com

Cenergy Power, MCE, RPCS Commission San Francisco Bay Area’s Largest Publicly Owned Solar Project

Posted on January 29, 2018November 20, 2023 by Bri Bruce

MONTEREY, CALIF. January 29th, 2018 – RPCS is pleased to congratulate Cenergy Power and sPower on the completion of their MCE Solar One project. A local renewable energy project built on an old refinery, MCE Solar One is a new 60-acre, 10.5 MW ground mount solar farm in Richmond, California.

The project deployed approximately 80,000 ground mounted modules using both a fixed tilt rack as well as single axis trackers, with RPCS supplying and installing the Array Technologies DuraTrack® HZ v3 tracker for the SAT portion. Pre-development costs were covered in part by customers participating in MCE’s Deep Green 100% renewable energy service. Once completed, MCE Solar One will generate renewable energy to power 3,417 homes per year.

MCE and the city of Richmond also committed to a 50 percent local hire requirement to build MCE Solar One, guaranteeing local benefits through clean energy job creation. In supporting this local hire requirement, MCE created over 300 jobs by partnering with RichmondBUILD, a program that focuses on developing skill in the high growth, high wage construction and renewable energy sectors. Eighty percent of graduates from RichmondBUILD’s programs are placed into well-paying jobs. MCE will train and hire skilled graduates of the RichmondBuild program as employees for the project.

“It’s great seeing an old refinery convert its property to a solar project. Overcoming site-specific environmental and property challenges on this site is proof that more of these projects are going to keep happening. It was a pleasure supporting MCE, sPower, and our long-term partners at Cenergy while providing opportunities for local workers through RichmondBUILD,” said RPCS Chief Sales Officer Alex Smith. “This project is a real achievement for everyone involved and a success for lots of people on lots of different levels. We’re very happy to have helped support MCE Solar One and to congratulate MCE, sPower, and Cenergy Power.”

Together, MCE, sPower, Cenergy, and RPCS are working toward increasing the use of renewable energy resources in an effort to help the state reach its greenhouse gas reduction goals, all while creating local jobs and clean power.

Learn more about the project at https://www.mcecleanenergy.org/news/press-releases/mce-solar-one/

About RP Construction Services, Inc.:
RPCS designs and builds ground mount solar projects using the industry’s gold standard for quality, the Array Technologies DuraTrack® HZ v3 Single-Axis Tracker. With over 300 MW and over 180 projects completed or under construction throughout the United States, RPCS provides full turnkey service and support for the industry’s most bankable and reliable tracker. RPCS’s expert knowledge of Array Technologies’ trackers ensures world class turnkey project assistance including site layout optimization, ancillary engineering services, tracker and foundation procurement, and complete mechanical installation. The team at RPCS provides reliable support at every step of the project, delivering a level of quality and efficiency that parallels ATI’s market reputation. For more information about RPCS, please visit rpcs.com or call us at 831.620.2188.

About Array Technologies, Inc.:
Array Technologies, Inc. is the leading solar tracking solutions and services provider for utility-scale projects. With efficient installation and terrain flexibility coupled with high reliability, durability, and performance, Array delivers the best project returns in the industry. As the chosen tracker for more than 16 GW years of energy production, Array’s products have been optimized through unparalleled experience garnered over nearly three decades. Array Technologies is headquartered in the United States with offices in Europe, Central and South America, the Middle East, and Australia. For more information, please visit arraytechinc.com.

RPCS Partners with REC Solar to Complete 4.5MW AC Solar Farm for CalPoly

Posted on January 26, 2018November 20, 2023 by Bri Bruce

Photo: REC Solar

MONTEREY, CALIF. – January 26th – On Wednesday, an official ribbon cutting ceremony for Cal Poly’s first solar farm celebrated the successful completion of a high profile and very meaningful solar project. The new solar farm is the first energy-related project since the university announced their goal of climate neutrality.

The 18.5-acre 4.5 MW AC solar site containing more than 16,000 solar panels is located on the western side of the CalPoly campus in San Luis Obispo, California. Set to generate more than 11 million kWh each year (enough to power over 1,000 homes), the solar farm will produce up to 25% of the university’s total electricity needs while creating nearly $17 million in savings.

CalPoly partnered with REC Solar, a San Luis Obispo-based company founded by two CalPoly alumni, and RPCS to design, construct, and install the site. The site is being financed by Duke Energy via a power purchase agreement that will allow CalPoly to purchase energy at a lower rate without paying upfront for the cost of the system’s construction and maintenance.

The solar farm uses ground-mounted single-axis tracking technology from RPCS partner Array Technologies. This innovative technology, specifically Array Technologies’ DuraTrack HZ v3 system, increases energy production of the solar modules by 20 to 25 percent over fixed-tilt systems. RPCS is the trusted DG partner for Array Technologies’ solar tracker systems and provides leading U.S. solar companies with turnkey services in the ground mount utility-scale solar sector.

Photo: REC Solar

The solar farm will also provide an added opportunity for students to study and conduct experiments in a hands-on environment. The site will incorporate a newly created solar engineering and microgrid laboratory to maximize academic applications for students and faculty.

“CalPoly is an important project for a lot of reasons and RPCS is proud to have contributed to its success. It was a pleasure making sure the trackers and installation were perfect and that everything from boundaries, topo, environmental, and schedule challenges were handled beautifully. All of us who worked on this project will remember it and be proud to visit for decades to come,” said Alex Smith, RPCS’s Chief Sales Officer. “Congrats to REC, Duke, and CalPoly’s leadership and students!”

The CalPoly campus is located on California’s Central Coast and in an environmentally sensitive and restricted area, neighboring the area’s iconic Bishop’s Peak. The geological realities for a ground mount project in this location included significant sloping and undulations as well as challenging soils which required sophisticated foundation designs and installation methods.

In addition, the campus neighbors an equestrian center, where subjecting the resident horses to noise was a concern. The team was also under strict regulations to ensure that construction did not interfere with important artifacts from nearby Native American cultural sites. RPCS adjusted its schedule and planned on behalf of REC and Duke to ensure that the installation timing, methods, and durations would be considerate and effective in reducing construction noise and disturbance.

The university is known for its sprawling, breathtaking grounds, so ensuring that it would remain pristine before, during, and after construction was a special goal that RPCS was able to achieve.

About RP Construction Services, Inc.: RPCS designs and builds ground mount solar projects using the industry’s gold standard for quality, the Array Technologies DuraTrack® HZ v3 Single-Axis Tracker. With over 300 MW and over 180 projects completed or under construction throughout the United States, RPCS provides full turnkey service and support for the industry’s most bankable and reliable tracker. RPCS’s expert knowledge of Array Technologies’ trackers ensures world class turnkey project assistance including site layout optimization, ancillary engineering services, tracker and foundation procurement, and complete mechanical installation. The team at RPCS provides reliable support at every step of the project, delivering a level of quality and efficiency that parallels ATI’s market reputation. For more information about RPCS, please visit rpcs.com or call us at 831.620.2188.

About Array Technologies, Inc.:  Array Technologies, Inc. is the leading solar tracking solutions and services provider for utility-scale projects. With efficient installation and terrain flexibility coupled with high reliability, durability, and performance, Array delivers the best project returns in the industry. As the chosen tracker for more than 16 GW years of energy production, Array’s products have been optimized through unparalleled experience garnered over nearly three decades. Array Technologies is headquartered in the United States with offices in Europe, Central and South America, the Middle East, and Australia. For more information, please visit arraytechinc.com.

VIDEO: http://ow.ly/wh9Q30ezJru

Official PR from REC Solar: https://recsolar.com/press/cal-poly-dedicates-new-solar-farm/

Is Solar a Hobby Job? No Longer!

Posted on January 15, 2018November 20, 2023 by Bri Bruce

In 1999, I had an internship at Sunlight & Power as a laborer for solar thermal and PV installations on residences. One day a project would be in Oakland, and the next day we would be in Redwood City. Solar was few and far between; my father called it a “hobby job” …

Today, the Department of Energy estimates that solar jobs are no longer a hobby. In fact, over 250,000 people are employed by this bright emerging technology sector. A light in the dark coal mining history of energy, the renewable energy industry along with distributed energy storage aims to create infrastructure jobs that cannot be exported or imported. Solar installed on US soil must be installed in the US. These jobs are only threatened by politics.

As a microstudy, our little company stgrpcs.wpengine.com has worked with 417 local hires in South Carolina, Colorado, Indiana, New Mexico, Georgia, Florida, California, North Carolina, Tennessee, Nebraska, and Mississippi – and I think I am missing a few others. We provide training and work. Our developer & EPC clients provide these great and expanding opportunities to build infrastructure that is local. In one particular town, Barnwell, South Carolina – the town treated us as family for many of the local sons & daughters came to work with us on the solar farm…. and there is more to come! We cannot stop the sun.

How many people work with your solar company? I bet it’s a growing number.

Why stop that growth? I am yet to hear a valid reason; yes there are technical challenges with storage and distribution – but let’s not run away from those challenges.

When we look at the world, what do we see? China installs solar too, yes. Is that a bad thing? The Chinese have installed more solar in the last 3 years than the USA and Germany (#2 and #3 PV Countries) combined in the last 15 years. Why not benefit from those economies of scale that a global economy creates?

Who are we protecting when we place a tariff?

In India, the price of solar panels has been reported as low as $0.34/watt-DC. The entire WORLD is installing solar these days. Why would we build a tariff wall to put ourselves behind the rest of the world? Let’s use these valuable US dollar$ to buy some non-plastic energy producing goods that will create skilled jobs, improve the infrastructure, and beef up energy security in the USA. If we let this thing ride, the opportunities and jobs will continue to grow.

In the US, new states are embracing wind, solar, and energy storage – with minnesota, illinois, nebraska, Connecticut, New York, New Jersey, Maryland, and many more realizing that solar energy is less expensive, and easier to deploy and maintain, than any other type of energy generation.

Let the sun shine in! This industry is not a hobby; it is now a global juggernaut. The USA should be leading the way, so I vote that we raise the bar.

Adam Larner
VP Operations, RPCS

Russell Pacific Continues East Coast Expansion with Orlando Distribution Warehouse

Posted on December 21, 2017November 20, 2023 by Nate Russell

Monterey, Calif. 12/21/2017

Russell Pacific, a wholesale distributor of solar electrical products, continues their east coast expansion with the opening of a solar distribution center in Orlando, Florida. Following the successful opening of their Baltimore warehouse earlier this fall, the Orlando warehouse is Russell Pacific’s second distribution center serving the east coast market. Product stocked in Orlando will provide solar contractors and integrators throughout the southeastern United States region with fast regional shipping, next-day local deliveries, and same day will-call product pickup.

Founded in 2009 by industry veterans, Russell Pacific is a wholesale distributor of solar modules, inverters and balance of systems (BOS) products for solar installers and integrators. By choosing only to focus on the solar industry’s premier brands from trusted manufacturers, Russell Pacific maintains a small, manageable product line, providing the best products at the best prices and fastest lead times.

Russell Pacific is now stocking the Orlando distribution center with North American Made Silfab Solar modules, REC Solar modules, SolarEdge, SMA,. and HiQ Solar inverters, and SnapNrack Solar Mounting Solutions. Array Technologies’ single-axis tracker systems are also available through their sister company, RPCS (RP Construction Services Inc.). Russell Pacific is dedicated to providing their customers with the highest level of sales and service, and is pleased to announce steady stock and fast turnaround for the solar industry’s Mid-Atlantic customer base. East coast sales are being managed by solar industry veteran, Christian May. Chris joined Russell Pacific after successful tenures at Maryland based PV developer / EPC, Standard Solar, and California based solar distributor, AEE Solar (a Sunrun company), said Eb Russell, Founder and CEO of Russell Pacific.

With multiple distribution warehouses located throughout California, Utah, Oregon, Maryland, and now Florida, Russell Pacific (www.russellpacific.com) supports solar installers and integrators throughout the United States. Deep product knowledge and manufacturer relationships enable us to pass on product confidence and empower our customers to stand behind their projects. When your name is on the line, you can trust Russell Pacific to supply quality products, on-time and on budget, every time. For more information, please contact East Coast Sales Director, Chris May at 301.832.7010 or cmay@russellpacific.com.

RPCS Volunteers, Sponsors the Denver Housing Authority Community Solar Build

Posted on November 3, 2017November 20, 2023 by Nate Russell

RPCS Volunteers and Construction Crew

Last week, team members from the Monterey office traveled to Watkins, Colorado to meet members from the construction crew on site at one of RPCS’ Colorado Array DuraTrack HZ tracker projects. Some of the most rewarding aspects about building DG projects across the country lie within the history and stories behind the projects. This particular project, built for the Denver Housing Authority is a perfect example. In partnership with GRID Alternatives and Namaste Solar, RPCS was proud to sponsor and attend GRID Alternative’s community solar build event.

GRID Alternatives Colorado partnered with the Denver Housing Authority (DHA) to build a 2MW, 100% low-income community solar garden, the country’s first that is developed, owned, and operated by a housing authority. Last week’s community build day event invited more than 150 volunteers, solar job trainees, and solar construction interns to come together and learn about the benefits of solar energy and the communities that it supports. Participants toured the project site, learned about the technology behind solar power and single axis trackers, and shared in the hands-on experience of the construction process.

Volunteers gather the morning of the volunteer day to participate in the community solar build.

Alongside GRID Alternatives and developer Namaste Solar, RPCS employees volunteered their time to help supply energy burdened families with affordable, renewable energy. The build day culminated in a celebration of the progress made and the hard work of all involved, where the presence of political champions, such as Aurora, Colorado Mayor Steve Hogan and members of the state senate, advocated for solar job training, community engagement, and clean energy.

The 11-acre array, including nearly 6,000 modules, will serve an estimated 500 to 700 homes, all DHA residents who qualify for the program and are below 185% of the federal poverty level. Not only will the program help families reduce their energy bills by nearly 20%, but it is also benefiting solar job seekers and reducing our carbon footprint. The solar garden will save 54,139 tons of C02, and is equivalent to planting 1.2 million trees, or taking 10,374 passenger vehicles off the road for one year.

Solar power generated from projects like the Denver Housing Authority Community Solar Garden will help low-income households live more affordably, helping contribute to their long-term financial security.

Learn more about the event here.

Lamesa Solar Facility Project Wins Utility Scale Category of the 2017 Solar Builder’s Project of the Year Award

Posted on October 4, 2017November 20, 2023 by Nate Russell

Array Technologies and Renewable Energy Systems’ Lamesa Solar Facility Project Wins Utility Scale Category of the 2017 Solar Builder’s Project of the Year Award

The Lamesa Solar Facility in Lamesa, Texas, belongs to one of the largest utility-scale solar portfolios in the state.

RPCS is proud to announce the achievement of our partner, Array Technologies, and solar developer Renewable Energy Systems (with whom RPCS has recently partnered for distributed generation solar tracking projects). A congratulations is in order for their win of the 2017 Solar Builder Project of the Year Award in the utility scale category.

The Lamesa Solar Facility in Lamesa, Texas, belongs to one of the largest utility-scale solar portfolios in Texas, consisting of 410,000 solar panels that provide 131 MW of clean power to 15,000 local homes. Although poor weather threatened the delivery and installation schedule immediately after breaking ground, the tracker systems were delivered on time with a high degree of efficiency and seamless project logistics.

Utilizing Array Technologies’ DuraTrack HZ v3, RES’s teams installed around 80 tracker rows per working day, completing the project with 25 percent fewer onsite workers in comparison to other solar tracking projects of similar size and scope. Originally expecting a 15-day commissioning period, RES commissioned in just 10 days, completing the project.

Developer: BNB Renewables Energy Holdings, Renewable Energy Systems (RES)
Contractor: Renewable Energy Systems (RES)
Modules: Trina Solar
Mounting: Array Technologies

View the complete list of this year’s winners here.

MCE Solar One Project Progress Update

Posted on September 21, 2017November 20, 2023 by Nate Russell

Check out this video from our friends at MCE Clean Energy sharing a project update for the MCE Solar One project in Richmond, CA. RPCS is proud to support MCE’s mission to bring Bay Area residents a clean, renewable source for power. In partnership with Jeff Lifur and team at Cenergy Power, RPCS is building a 5.4MW (ac) solar project using the Array Technologies DuraTrack HZ v3 single axis tracker.

Constructed on a Chevron Richmond Refinery brownfield site, the MCE Solar One project will be the largest publicly owned solar array in the Bay Area to date. The project is being built by graduates of the RichmondBUILD academy. A public-private partnership focused on developing talent and skill in the high growth, high wage construction and renewable energy fields, RichmondBUILD provides an opportunity for graduates local to the Richmond, CA area to develop careers in our growing industry. In total, the MCE Solar One project will provide over 340 jobs and at completion generate enough energy to power over 3,000 homes. RPCS’ own Surinder Sandhu, a RichmondBUILD academy graduate is featured in this video. Great job team!

https://www.youtube.com/watch?v=fJMZ6A1UxT0

RPCS Supports i1 Energy’s First Solar Project

Posted on July 12, 2017November 20, 2023 by Nate Russell

i1 Energy Provides EPC services for Solar Projects throughout the country.

I1 Energy to EPC 6.8-MW solar project in New Mexico

I1 Energy, has executed a turnkey engineering, procurement and construction (EPC) contract with Onyx Renewable Partners L.P. for its 6.8 MW (dc) Middle Daisy Solar project in Lovington, New Mexico. The project includes a 69-kV substation and switch.

Design and procurement services are underway and the project is expected to be completed by the end of Q3. Onyx’s CEO Matthew Rosenblum said, “We are excited to work with i1 as we build our company’s first solar project in New Mexico.”

Topher Wood, COO of i1 Energy, said, “We are very excited to be working with Onyx to provide utility solar in New Mexico. This project kicks-off a strong start for i1 Energy and we look forward to continuing to provide quality projects alongside our partners in the industry.”

RPCS is proud to support i1 Energy on their inaugural EPC solar project in New Mexico. The team at RPCS is looking forward to building a portfolio of projects with the i1 team using the industry’s trusted choice for tracker quality and reliability, the Array Technologies DuraTrack® HZ V3 Single Axis Tracker.

Join RPCS at Intersolar North America 2017

Posted on July 7, 2017November 20, 2023 by Nate Russell

Join RPCS & ATI at Intersolar North America

Join RPCS at Intersolar North America Next Week

Members from the RPCS team will join Array Technologies at booth 9811

MONTEREY, CA – RPCS (RP Construction Services Inc.) is excited to be attending Intersolar North America 2017, and will be holding meetings with customers at the Array Technologies Inc. company booth 9811, located on the 3^rd floor of the conference. RPCS is honored to represent the world’s most reliable tracker as ATI’s Exclusive Value Added Reseller for all projects 10 MW (ac) and under.

RPCS provides complete, turnkey services for ATI’s DuraTrack® HZ v3 single axis tracker product. Providing expert knowledge and support for the Array product, RPCS can assist you with site layout optimization, optimized foundation design, ATI procurement and foundation post procurement. Our team also offers turnkey mechanical installation services, ATI commissioning and a full parts & labor warranty.

RPCS has completed over 125 ATI DG projects in the past two years. RPCS has partnerships with the solar industry’s leading EPCs, and is currently building portfolios of Array Technologies DuraTrack® HZ v3 projects throughout the country.

RPCS will demo ATI’s live DuraTrack® HZ v3 tracker system, optimized for both traditional 72 cell and First Solar module applications. Let RPCS show you why the ATI DuraTrack® HZ is the best tracker in the industry, and how you can work with RPCS to make integrating trackers into your project portfolios a seamless, stress free experience.

Indiana Newspaper Features RPCS

Posted on July 5, 2017November 20, 2023 by Nate Russell

Mitchell, IN Hoosier Energy ATI Tracker Project

Courtesy of Jeff Routh, Times Mail – Bedford, IN

New Solar Field Under Construction South of Mitchell

If you’ve driven south along State Road 37 lately, you’ve probably noticed the solar panel field under construction just south of Mitchell.

Orange County REMC will be the beneficiary of that new solar array being installed south of White River Co-Op, between State Road 37 and Clover Lane. The field is being built by Hoosier Energy.

The local project is one of 10 solar fields being built by Hoosier Energy. It is the 10th to be completed and is slated to go online later this year. That could be as early as September, if all goes well. A dedication is tentatively planned for Sep. 14.

Construction began earlier this month and it is expected to take three months to build the array, get interconnected and connect to the grid. The total average cost for the 10 solar arrays that Hoosier Energy has built in this project is $2.5 million per array. According to Hoosier Energy, the cost of energy production in this type of array is actually cheaper than if a member was to install their own system at their own home.

The solar array is a 1 megawatt array with 4,000 solar panels and 18 inverters that convert the DC generated power into AC electricity that can be used in the home. The array will generate 2 million kilowatt hours, which is enough to power about 150 houses, according to Matt Deaton, General Manager of Orange County REMC, and information provided to the paper.

Orange County REMC has about 8,000 meters in its coverage area with about 93 percent of those being residential meters. Construction crews are currently installing more than 4,100 solar panels. Each panel weighs about 52 pounds. The panels are QCells and are engineered in Germany. The panels are being installed on vertical posts that have been driven into the ground. The vertical posts are connected with a horizontal rod to which the panels are connected. This vertical rod is motorized and the panels will be able to rotate with the movement of the sun, allowing for maximum collection.

That means the panels will be facing east in the morning and will gradually rotate toward the west as the earth rotates.

The lifespan of the array is projected at 25 years and it covers more than 8 1/2 acres.

Hoosier Energy covers most of southern Indiana, from just north of Bloomington south to the Ohio River.

In 2000, 100 percent of Hoosier Energy’s electricity was generated by burning coal. Today, only 58 percent is generated through burning coal, with an additional 37 percent generated through natural gas plants and the remaining 5 percent through renewable sources. It is projected that, by 2025, at least 10 percent will be produced through renewable sources. Renewable sources include: landfill gas, coal bed methane, hydro-electric, wind and solar energy.

By diversifying their generation methods, Hoosier Energy hopes to better control its costs for generating power and therefore stabilize the rates charged to consumers.

ATI Ships Over 6 Gigawatts Globally

Posted on October 25, 2016November 20, 2023 by Nate Russell

Array Technologies Leads U.S. Market in Solar Tracker Shipments

Solar tracker manufacturer has shipped six GW of solar trackers globally

October 25, 2016 — Array Technologies, Inc. (ATI), the global leader in solar tracking solutions and services, announced today it has shipped six GW of solar trackers globally. The news comes on the heels of GTM Research’s recent report The Global PV Tracker Landscape 2016: Prices, Forecasts, Market Shares and Vendor Profiles, which reported that ATI is the nation’s market share leader in solar tracker manufacturing based on MW volume of tracker shipments.

The Global PV Tracker Landscape 2016 report notes that ATI is not only the U.S. market leader in solar tracking, but also has “the most extensive track record of any tracking vendor and is in the top tier of bankable tracking vendors.”

ATI’s unmatched experience is a key component to the company’s leadership in the industry. While newer competitors face a steep learning curve, ATI’s culture of innovation combined with wisdom from decades in the field and over 12,900 MW years of tracker operation enables the company to provide technology with both low up-front costs and long-term, proven reliability. ATI’s trackers have a simple and elegant design, with the flexibility to adapt to a variety of terrains. While many competing tracker architectures contain more than 29,000 parts in a 100 MW solar plant, an ATI-equipped plant of the same size is comprised of a mere 187 parts, drastically reducing the complexity of install and the level of operations and management required to maintain the project. ATI’s trackers are also robustly designed to survive extreme weather conditions in any tracker position, unlike alternative trackers which rely on assuming a specific position, such as wind-stow, to withstand weather events.

“With 27 years exclusively dedicated to solar tracking, Array Technologies has learned the best processes, business strategies and technology advancements to provide both a high-quality and low-cost product,” said Ron Corio, CEO of ATI. “We look forward to growing our leadership beyond the U.S. to meet the needs of the global utility-scale solar market.”

The GTM Research report follows a recent announcement that the Power Opportunities group of Oaktree Capital Management, L.P., a private equity investment strategy focused on accelerating the performance of businesses in the energy and power industries, invested in ATI to enhance the tracker company’s global expansion. The firm targets leading infrastructure and equipment businesses in the energy space. The partnership provides ATI with the capital and strategic support needed to expand the company’s global utility-scale solar tracker operations.

About Array Technologies, Inc.:

Array Technologies is the worldwide market leader in tracking solutions for utility and commercial solar electric generation systems, with six gigawatts shipped and installed across the globe. Over the past 27 years, Array’s innovation in solar tracker design and delivery has set the bar for providing the lowest levelized cost of electricity through our easy to install, maintain, and highly reliable tracking systems. Headquartered in Albuquerque, NM, Array Technologies’ solutions are engineered in the USA. For more information about Array Technologies, please visit arraytechinc.com, connect with us on LinkedIn, join us on G+, follow us on Twitter and subscribe to our YouTube channel.

Array Technologies Announces RP Construction Services as Exclusive Value Added Reseller for Projects Under 10 MW (ac)

Posted on September 15, 2016November 20, 2023 by Nate Russell

Albuquerque, NM | 9/15/16

Array Technologies, Inc. (ATI), the world’s leading manufacturer of reliable solar tracking solutions, announces an expansion of their highly successful partnership with solar design and construction company, RP Construction Services, Inc. (RPCS). RPCS now serves as ATI’s exclusive national Value Added Reseller (VAR) for all projects 10 MW (ac) and under.

Working together since 2009, the Array Technologies and RP Construction Services teams have shared great success in the solar tracker market, servicing leading solar companies across a diverse range of portfolios and projects.

“Array Technologies continues to be the tracker market’s standard for quality. We’re honored that Array trusts RPCS as their exclusive value added partner for all projects under 10 MW (ac), ensuring that system owners will recognize the ATI quality through both engineering and installation,” said Eb Russell, founder and President of RP Construction Services Inc.

“I know the RPCS team well and consider them an extension of the ATI team. They do excellent work and will make their customers’ projects successful in every way,” said Ron Corio, founder and CEO of Array Technologies, Inc. “We are looking forward to expanding our reach into the DG space through this strong partnership that supports a growing market segment demanding reliable, high-performing tracker solutions.”

RP Construction Services is currently building DuraTrack^® HZ installations across the country, assisting major solar companies with their growing portfolios of single-axis tracker projects.

About Array Technologies, Inc.:

Array Technologies is the worldwide market leader in tracking solutions for utility and commercial solar electric generation systems, with nearly 6 gigawatts shipped and installed across the globe. Over the past twenty-seven years, Array’s innovation in solar tracker design and delivery has set the bar for providing the lowest levelized cost of electricity through our easy to install, maintain, and highly reliable tracking systems. Headquartered in Albuquerque, NM, Array Technologies’ solutions are engineered in the USA. For more information about Array Technologies, please visit arraytechinc.com, connect with us on LinkedIn, join us on G+, follow us on Twitter and subscribe to our YouTube channel.

About RP Construction Services, Inc.:

RPCS’ expert knowledge of Array Technologies’ trackers ensures world class turnkey project assistance including site layout optimization, ancillary engineering services, tracker supply, foundation post procurement, and complete mechanical installation. The team at RPCS provides reliable support at every step of their projects, delivering a level of quality and efficiency that parallels ATI’s market reputation. For more information about RPCS, please visit rpcs.com or call us at (855) 428-3000 or (646) 831-0663.